Start with the lightest setting. Check that the disk cuts an adequate slot and allows the hose guide to ride in the trench. Increase the tension gradually until the guide tracks consistently in the trench.
360
BANDIT™
Put nitrogen where your crop can use it.
360 BANDIT is a planter-mounted nitrogen placement system that applies UAN three inches from each side of the seed and ¾ inch below the surface for efficient uptake and reduced volatilization.
BETTER NITROGEN PLACEMENT
Place nitrogen where developing roots can access it while keeping it safely away from the seed.
REDUCE NITROGEN LOSS
Get UAN beneath the soil surface to reduce volatilization and keep more nitrogen available.
DO MORE IN ONE PASS
Apply nitrogen while you plant—eliminating the need for another trip across the field.
PRECISION PLACEMENT IN ACTION.
3″ FROM THE SEED → ¾″ BELOW THE SURFACE → ONE PASS
See how 360 BANDIT places nitrogen beside and below the seed, all while you’re planting.
OVERVIEW
BETTER NITROGEN PLACEMENT.
BACKED BY GROWERS AND FIELD RESULTS.
“360 BANDIT gives us better nitrogen placement with lower maintenance.”
Jacob Strassburg
Woodford, WI
+40
BU./AC.
Across six Illinois corn-after-soybean trials, 360 BANDIT delivered a 40.4 to 42.6 bu./ac. yield advantage.
+16.1
BU./AC.
Two-year yield advantage in corn after corn at Tremont, Illinois.
360 BANDIT PRICING
STARTING AT
$365.00
PER ROW*
*Suggested list price per row, before promotions. Final pricing varies by dealer, configuration, freight and applicable taxes.
LIMITED-TIME OFFER
REBATE FOR
$25.00
PER ROW*
*On qualifying 360 BANDIT orders placed Aug. 1, 2026 – Mar. 15, 2027. No minimum rows.
360 BANDIT FAQs
Find quick answers about nitrogen rates, spring tension, field conditions, wear parts and day-to-day operation.
How much nitrogen can I apply with 360 BANDIT?
Application rates depend on soil type and field conditions. 360 BANDIT places nitrogen approximately three inches from the seed and ¾ to 1 inch below the soil surface, creating separation between the seed and nitrogen band. Typical application rates range from 30 to 80 units of nitrogen.
How does 360 BANDIT perform on curves and contours?
Because the disks sit between the gauge wheels and closing wheels, they closely follow the seed trench through curves and contours. It takes an extremely tight turn—approximately 14 degrees—before the nitrogen band moves close to the seed trench.
How does 360 BANDIT handle rocks and clods?
The spring-loaded opening disk can flex over rocks and clods. As the closing disk arm moves upward, the tensioned hose guide moves toward the trench to help reduce splatter. An included rock guard helps prevent debris from becoming wedged in the closing-wheel area.
Does 360 BANDIT work in no-till and cover crops?
Yes. 360 BANDIT runs in the path cleared by the gauge wheels, no-till coulters and row cleaners. We recommend using row cleaners in no-till and cover-crop conditions and checking disk spring tension to ensure adequate penetration in harder soils.
How long do the hose guides last?
Hose guides are replaceable wear items, and their lifespan varies by soil type and field conditions. Under typical conditions, they are not expected to require replacement during the planting season.
How long do the coulter disks last?
The coulter disks are designed to provide multiple seasons of use, although wear varies by soil type and field conditions. Always install the supplied flat washer to help prevent dirt and debris from entering the bearing and extend bearing life.
How much length does 360 BANDIT add to the row unit?
360 BANDIT extends the row unit by approximately five inches.
360 BANDIT
ROI CALCULATOR
See how quickly 360 BANDIT could pay for itself based on your acres, expected yield gain and corn price.
COMPATIBILITY
| Make | Series | Compatible Models |
|---|---|---|
John Deere
|
MaxEmerge® | MaxEmerge® Plus, Pro, XP and XP Pro; MaxEmerge® 5; ExactEmerge®; 7200, 7240, 7300 and 7340 |
John Deere
|
7000 Series | 7000 and 7100 |
Kinze
|
3000 Series | 3000, 3110, 3140, 3200, 3500, 3600, 3660, 3700 and 3800 |
Kinze
|
2000 Series | 2000, 2100, 2200, 2210, 2300, 2500, 2600 and 2700 |
White
|
9000 Series | 9100, 9180, 9200, 9500, 9700, 9800, 9831, 9936 and PP Ready Row Unit |
White
|
8000 Series | — |
Harvest International
|
Laser Pro 1 | All units |
Great Plains
|
25 Series and 5000 Series | — |
Case IH
|
Early Riser 5 Series | 1200, 1210, 1215, 1220, 1225, 1230, 1235, 1240, 1245, 1250, 1255, 1260 and 1265 |
No rows for that make.
Before you order
- If using aftermarket closing wheels, inspect clearance with installed 360 BANDIT disk blades and hose guides before operating.
- Compatibility and operation with aftermarket closing systems, including FurrowForce, is not supported.
- 360 BANDIT for Great Plains may not be compatible with twin-row planters.
- 360 BANDIT for Case IH is not compatible with Yetter’s spiked closing disks or V-configuration conversion kits.
- All plumbing and liquid delivery—including pumps—to the row unit are the responsibility of the end user.
- For ExactEmerge row units with Keaton Quick Attach firmers, contact Product Support to confirm compatibility.
BEST PRACTICES
Set up 360 BANDIT depth, spring pressure and hose position for consistent nitrogen placement and less wear.
OPERATING DEPTH
Place nitrogen just below the soil surface, no more than 1 inch deep when planting seed at 2 inches. Running deeper accelerates wear on disks, bearings and bushings.
SPRING SETTING
Use the lightest spring setting that provides adequate penetration to minimize downforce impact and wear. Start in notch 1 and inspect disk and hose position; move to notch 2 if penetration is inadequate. Notches 1 and 2 cover most conditions.
NOTCH 1
Conventional tillage and many no-till or strip-till fields following soybeans.
NOTCH 2
Firm no-till soybean ground, most no-till corn and high-residue conventional tillage.
NOTCH 3
Very wet, sticky clay and hard no-till corn ground.
DRAG CHAIN AND EXTENSION
Use the optional wide drag chain to help seal the slot. With the planter in planting position, the chain should lift 8–12 inches before becoming tight. Adjust using different hole pairs on the extension arms. Use extensions with spike-style closing wheels to prevent the chain from catching.
LEAKING HOSES
Fully seat hoses in the push-connect fittings. The hose may feel seated after about ¼ inch; push firmly to insert it another ½ inch.
CLEAR THE PATH
Use row cleaners to move residue, clods and rocks away from the disks and hose guides.
ROCK GUARDS
Standard guards help keep rocks and clods from funneling through the coulters and lodging in the closing wheels. Heavy-duty guards are available for extreme conditions.
LOCK OUTS
When BANDIT is not in use, lock it up with a ⅜-inch bolt or pin and use the lightest spring setting. If spiked closing wheels interfere, move the wheel or wheels to the rearmost mounting hole for clearance.
PIVOT ARM BOLT CONTACT
The arms are designed to flex inward and outward. Bolts that are close together or touching are not a concern.
SUPPORT
Find installation guides, how-to videos and product resources to keep your equipment running.
-
Case IH Installation Video
-
John Deere Installation Video
- Case IH Print Installation Instructions
- Great Plains Print Installation Instructions
- Harvest International Print Installation Instructions
- John Deere 7000 & Kinze 2000 Installation Instructions
- John Deere MaxEmerge Print Installation Instructions
- Kinze 3000 Print Installation Instructions
- White 8000 Print Installation Instructions
- White 9000 Print Installation Instructions






