Tractor tanks with capacity and balance

360 TANKS tractor-mounted liquid tank system

CARRY MORE

BALANCE THE LOAD

KEEP YOUR VIEW

Play Video

OVERVIEW

The system has a capacity of 700 gallons.

The system weighs approximately 2,000 pounds when empty.

Installation takes approximately four hours with two people and a forklift.

The tanks feature a low-profile design that improves visibility compared with other saddle and front-mounted tanks. The tanks are no wider than a tractor equipped with duals, so they do not increase transport width.

Yes. 360 TANKS require front duals and are not compatible with tractors running single front tires. Check with your 360 YIELD dealer to confirm fitment for your tractor.

The standard 360 TANKS kit includes:

  • 360 TANKS
  • Frame
  • Mounting hardware
  • Front shutoff valves

An optional hose kit is available that includes:

  • Ports
  • Hoses
  • Connections needed to fill the tanks and plumb the system to the planter

360 TANKS can be used with any standard PTO or hydraulic pump and any standard control system.

The 360 TANKS frame occupies the area where the front weights are normally mounted. The mounting brackets and tanks also add some weight to the front of the tractor.

An optional weight-mounting kit is available that allows a limited number of additional front weights to be installed.

Make Series Compatible Models Years Front Axle Transmission Row Spacing
John Deere 8000R 8225R, 8235R, 8245R, 8260R, 8270R, 8285R, 8295R, 8310R, 8320R, 8335R, 8345R, 8360R, 8370R and 8400R 2012+ Rigid or ILS (IVT/E23 Power Shift and PowerShift) 30" and less
John Deere 8R 8R230, 8R250, 8R280, 8R310, 8R340, 8R370 and 8R410 2012+ Rigid or ILS (IVT/E23 Power Shift and PowerShift) 30" and less
John Deere 8030 8130, 8230, 8330, 8430 and 8530 2006–2011 Rigid or ILS (IVT and PowerShift) 30" and less
Make Series Compatible Models Year Track Size Row Spacing
John Deere 8RX 8RX310, 8RX340, 8RX370 and 8RX410 2020–2022 18" only 120" center to center
Make Series Model (Year) Row Spacing
Case IH MX (side hood vents) MX180 (1999–2002), MX200 (1999–2002), MX210 (2003–2006), MX215 (2006–2007), MX220 (1999–2002), MX230 (2003–2006), MX240 (1999–2002), MX245 (2006–2007), MX255 (2003–2006), MX270 (1999–2002), MX275 (2006–2007), MX285 (2003–2006) and MX305 (2006–2007) 30" and less
Case IH Small Magnum (side hood vents) 180 (2009+), 190 (2009–2013), 200 (2014+), 210 (2009–2013), 215 (2008–2011), 220 (2014+), 225 (2005–2013), 240 (2014+), 245 (2008–2011), 250 (2005–2011), 275 (2007–2011), 280 (2005–2011), 305 (2008–2011), 310 (2005–2011) and 335 (2007–2011) 30" and less
Case IH Large Magnum (venting on top of hood) 235 (2011–2013), 250 (2014+), 260 (2011–2013), 280 (2014+), 290 (2011–2013), 310 (2014+), 315 (2011–2013), 340 (2011–2018), 370 (2012–2013) and 380 (2014+) 30" and less
  • Front Duals are required for 360 TANK operation. Check tire load ratings prior to operation.
  • Tire diameter should not exceed 63".
  • Tire spacing wider than 30" requires additional vertical clearance.
  • Once installed, check tire clearance before operating.
  • Light duty OEM or aftermarket front axles that do not accommodate front duals should not be used.
  • For 8RX systems, 120" spacing and 18" tracks are required.

FIND THE RIGHT FIT FOR YOUR OPERATION.