Put nitrogen where your crop can use it.

360 BANDIT

BETTER NITROGEN PLACEMENT

REDUCE NITROGEN LOSS

DO MORE IN ONE PASS

Play Video

OVERVIEW

360 BANDIT

Start with the lightest setting. Check that the disk cuts an adequate slot and allows the hose guide to ride in the trench. Increase the tension gradually until the guide tracks consistently in the trench.

Application rates depend on soil type and field conditions. 360 BANDIT places nitrogen approximately three inches from the seed and ¾ to 1 inch below the soil surface, creating separation between the seed and nitrogen band. Typical application rates range from 30 to 80 units of nitrogen.

Because the disks sit between the gauge wheels and closing wheels, they closely follow the seed trench through curves and contours. It takes an extremely tight turn—approximately 14 degrees—before the nitrogen band moves close to the seed trench.

The spring-loaded opening disk can flex over rocks and clods. As the closing disk arm moves upward, the tensioned hose guide moves toward the trench to help reduce splatter. An included rock guard helps prevent debris from becoming wedged in the closing-wheel area.

Yes. 360 BANDIT runs in the path cleared by the gauge wheels, no-till coulters and row cleaners. We recommend using row cleaners in no-till and cover-crop conditions and checking disk spring tension to ensure adequate penetration in harder soils.

Hose guides are replaceable wear items, and their lifespan varies by soil type and field conditions. Under typical conditions, they are not expected to require replacement during the planting season.

The coulter disks are designed to provide multiple seasons of use, although wear varies by soil type and field conditions. Always install the supplied flat washer to help prevent dirt and debris from entering the bearing and extend bearing life.

360 BANDIT extends the row unit by approximately five inches.

Make Series Compatible Models
John Deere MaxEmerge® MaxEmerge® Plus, Pro, XP and XP Pro; MaxEmerge® 5; ExactEmerge®; 7200, 7240, 7300 and 7340
John Deere 7000 Series 7000 and 7100
Kinze 3000 Series 3000, 3110, 3140, 3200, 3500, 3600, 3660, 3700 and 3800
Kinze 2000 Series 2000, 2100, 2200, 2210, 2300, 2500, 2600 and 2700
White 9000 Series 9100, 9180, 9200, 9500, 9700, 9800, 9831, 9936 and PP Ready Row Unit
White 8000 Series —
Harvest International Laser Pro 1 All units
Great Plains 25 Series and 5000 Series —
Case IH Early Riser 5 Series 1200, 1210, 1215, 1220, 1225, 1230, 1235, 1240, 1245, 1250, 1255, 1260 and 1265

Before you order

  • If using aftermarket closing wheels, inspect clearance with installed 360 BANDIT disk blades and hose guides before operating.
  • Compatibility and operation with aftermarket closing systems, including FurrowForce, is not supported.
  • 360 BANDIT for Great Plains may not be compatible with twin-row planters.
  • 360 BANDIT for Case IH is not compatible with Yetter’s spiked closing disks or V-configuration conversion kits.
  • All plumbing and liquid delivery—including pumps—to the row unit are the responsibility of the end user.
  • For ExactEmerge row units with Keaton Quick Attach firmers, contact Product Support to confirm compatibility.

FIND THE RIGHT FIT FOR YOUR OPERATION.